Respirators

Highlights - Approved 3M replacement part - Designed for use with 3M Half Facepiece 6000 Series (sold separately) - Easy installation allows for quick replacement - Head harness assembly can extend service life of facepiece - Replaceable part can potentially result in respiratory equipment cost savings

Individual packaging and flat fold design provides convenient storage and portability.

Knitted comfortable earloop strap for easy donning and doffing.

Adjustable noseclip helps reduce potential for eyewear fogging and ensure a better seal and fit.

Highlights

• Individual packaging and flat fold design provides convenient storage and portability
• Knitted comfortable earloop strap for easy donning and doffing
• Adjustable noseclip helps reduce potential for eyewear fogging and ensure a better seal and fit
• Conforms to AS/NZS 1716 standard

3M 9501+ respirator is an economical earloop model designed to help provide quality, reliable protection against certain non-oil based particles.

Approved 3M system component.

Designed to hold 3M Particulate Filter 5N11 and 5P71/07194 (AAD) (sold separately).

Component works with 3M Respirator 6000 and 7500 Series and 3M Cartridges 6000 Series.

Highlights

• Approved 3M system component
• Designed to hold 3M Particulate Filter 5N11 and 5P71/07194 (AAD) (sold separately)
• Component works with 3M Respirator 6000 and 7500 Series and 3M Cartridges 6000 Series
• Refer to the Filter/Cartridge User Instructions for further information

Used to hold 3M™ Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M™ Respirators 6000 Series and 3M™ Cartridges 6000 Series.

NIOSH approved for protection against certain organic vapors, acid gases, ammonia, methylamine and formaldehyde.

Swept-back design allows an enhanced field of view and comfort.

Bayonet compatibility allows use with many 3M half and full facepiece designs.

Highlights

• NIOSH approved for protection against certain organic vapors, acid gases, ammonia, methylamine and formaldehyde
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Use with 3M Reusable Respirators

NIOSH approved against certain organic vapors, acid gases, ammonia, methylamine or formaldehyde. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Low profile design allows a wide field of vision

Lightweight makes long period of wear bearable

Soft, elastomeric face-fit secures a lasting comfort

Highlights

• Low profile design allows a wide field of vision
• Lightweight makes long period of wear bearable
• Soft, elastomeric face-fit secures a lasting comfort
• Unique easy to don/doff strap system

3M 3100 Single Cartridge Respirator was made specifically for the slender Asian faces and for a wide range of industries i.e. Agriculture, Automotive etc. The 3M 3100 is size Small / Medium.

Low profile design allows a wide field of vision.

Lightweight makes long period of wear bearable.

Soft, elastomeric face-fit secures a lasting comfort.

Highlights

• Low profile design allows a wide field of vision
• Lightweight makes long period of wear bearable
• Soft, elastomeric face-fit secures a lasting comfort
• Unique easy to don/doff strap system

The 3M Reusable Half Face Mask Respirator 3200. Features include: An elastomeric face seal, M/L in size, it is a compact and lightweight half mask that offers an economical solution for a range of applications.

Protects the workers againt P2 Level particulates and nuisance level organic vapor relief below the Permissible Exposure Level (PEL).

With activated carbon layer.

For use with 3M™1200, and HF-50 Single-Cartridge Facepiece Reusable Respirator.

Highlights

• Protects the workers againt P2 Level particulates and nuisance level organic vapor relief below the
• Permissible Exposure Level (PEL)
  With activated carbon layer
• For use with 3M™1200, and HF-50 Single-Cartridge Facepiece Reusable Respirator
• Compatible with 3M™ Filter Holder 1700

3M Particulate Filter 1744C, with activated carbon layer, is used for use on the 3M Reusable Half Face Mask Respirator model 3200 or 1200.

Protects the workers againt P2 Level particulates

For use with 3M™1200, 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator.

Compatible with 3M™ Filter Holder 1700.

Highlights

• Protects the workers againt P2 Level particulates
• For use with 3M 1200, 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator
• Compatible with 3M Filter Holder 1700
• Complies to KMOEL P2 standards

3M Particulate Filter 1744 is used for use on the 3M Reusable Half Face Mask Respirator model 3200 or 1200.

Lightweight makes long period of wear bearable

Soft, elastomeric face-fit secures a lasting comfort

Highlights

• Lightweight makes long period of wear bearable
• Soft, elastomeric face-fit secures a lasting comfort
• Unique easy to don or doff strap system

Low profile design allows a wide field of vision

Used to hold 3M Filters 1744 and 1744C.

For use with 3M HF-50 Single-Cartridge Facepiece Reusable Respirator Series.

Compact design increases vision and safety.

Highlights

• Used to hold 3M™ Filters 1744 and 1744C
• For use with 3M™ HF-50 Single-Cartridge Facepiece Reusable Respirator Series
• Compact design increases vision and safety
• Lightweight body and cradle head harness increase comfort

Used to hold 3M Particulate Filters 1744 and 1744C in place on top of 3M Respirators HF-50 Series.

Features welded strap attachment for higher durability.

Soft nose foam and adjustable noseclip to provide custom fit and secure seal.

An economical choice for hot/humid work settings and longer periods of wear.

Highlights

• Features welded strap attachment for higher durability
• Soft nose foam and adjustable noseclip to provide custom fit and secure seal
• An economical choice for hot/humid work settings and longer periods of wear
• 3M Cool Flow Valve: Effective removal of heat build up provides a cooler and more comfortable wear

This classic disposable N95 particulate respirator is designed to help provide comfortable, reliable worker respiratory protection against certain non-oil based particles. Comes with the proprietary 3M Cool Flow Valve.

This series combines comfort and convenience

Comfortable soft, lightweight facepiece with easy-to-adjust head straps

NIOSH approved for negative pressure air purifying and supplied air dual airline applications

Highlights

• This series combines comfort and convenience
• Comfortable soft, lightweight facepiece with easy-to-adjust head straps
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
  Can be disassembled, cleaned and reused

3M Half Facepiece Reusable Respirator 6200/07025(AAD) offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.

This series combines comfort and convenience

Comfortable soft, lightweight facepiece with easy-to-adjust head straps

NIOSH approved for negative pressure air purifying and supplied air dual airline applications

Highlights

• This series combines comfort and convenience
• Comfortable soft, lightweight facepiece with easy-to-adjust head straps
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• Can be disassembled, cleaned and reused

3M Half Facepiece Reusable Respirator, 6100/07024(AAD) offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gases and vapors according to NIOSH approvals.

To be used with 3M 7700 series single-cartidge half face respirator.

N95 approved

Prefilter - 1000 pieces per case

Highlights

• To be used with 3M 7700 series single-cartidge half face respirator
• N95 approved
• Prefilter - 1000 pieces per case
• Used with 3M™ 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator

The 3M Pre-Filter 7711 is an accessory used in addition to 3M Half Facepiece Respirators 1200, 3000 Series, and 7700 Series

Filter is ideal for spray painting, chemical spraying and coating, fumigation, degreasing, cleaning & maintenance.

Purifying tub for the lowest concentration of organic compounds, second-class dust-proof filter

Combined with 3M 1200, 3200 and HF-50 series faces

Highlights

• Filter is ideal for spray painting, chemical spraying and coating, fumigation, degreasing, cleaning & maintenance
• Purifying tub for the lowest concentration of organic compounds, second-class dust-proof filter
• Combined with 3M™ 1200, 3200 and HF-50 series faces
• Replace immediately in case of loss, damage or deformation

The 3M 3311K 55 purifier provides protection against organic compounds and is equipped with a second-class dust filter for use in common dust and mist sites. Available in combination with 3M 1200, 3200 and HF 50 surfaces.

China SAWS (State Administration of Work Safety), JMHLW (Japanese Ministry of Health, Labor, and Welfare), and KMOEL (Korea Ministry of Employment and Labor) certified

Simple installation and usage requirements reduces training requirements

Wide range of applications reduces inventory needs

Highlights

• China SAWS (State Administration of Work Safety), JMHLW (Japanese Ministry of Health, Labor, and Welfare), and KMOEL (Korea Ministry of Employment and Labor) certified
• Simple installation and usage requirements reduces training requirements
• Wide range of applications reduces inventory needs
• High pressure

The 3M 3301K-55 Single Cartridges are designed to help protect workers from organic vapors. Use with half face piece cartridges 1200, 3200, and HF-52 series.

KMOL standard

Used for protection against organic vapor

Used with 3M 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator

Highlights

• KMOL standard
• Used for protection against organic vapor
• Used with 3M 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator
• Added usage with 3M Pre-Filter 7711 filter and 3M™ Prefilter Retainer 774

Organic Vapor Cartridge for use with 3M 3200 and 3100 Single-Cartridge Facepiece Reusable Respirator

KMOEL approved for protection against certain organic vapors or acid gases.

Used with 3M 3200, 3100, 1200 & HF-50 Series Single-Cartridge Facepiece Reusable Respirator.

Secure and simple catridge installation and removal from facepiece.

Highlights

• KMOEL approved for protection against certain organic vapors or acid gases
• Used with 3M 3200, 3100, 1200 & HF-50 Series Single-Cartridge Facepiece Reusable Respirator
• Secure and simple catridge installation and removal from facepiece
• Good utilize during spray paint, spraying chemicals and coatings, curing, degreasing, cleaning and maintenance

Organic Vapor & Acid Gas Cartridge for use with 3M 3200, 3100, HF-50 & 1200 Series Single Cartridge Facepiece Reusable Respirator

NIOSH approved for protection against certain organic vapors

Organic vapor cartridge

Swept-back design for enhanced field of view and balance

Highlights

• NIOSH approved for protection against certain organic vapors
• Organic vapor cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M Half and Full Facepieces 6000 Series and 3M Half and Full Facepieces 7000 Series with bayonet style cartridge holders

The 3M Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

NIOSH approved for protection against certain organic vapors

Organic vapor cartridge

Swept-back design for enhanced field of view and balance

Highlights

• NIOSH approved for protection against certain organic vapors
• Organic vapor cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M Half and Full Facepieces 6000 Series and 3M Half and Full Facepieces 7000 Series with bayonet style cartridge holders

NIOSH approved against certain organic vapors. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders. The 3M Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. The cartridge may be used for vapor concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation.

Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria

Advanced Electret Media (AEM) provides lightweight, easy breathing comfort

Versatile protection against many oil and non-oil based particulate contaminants

Highlights

• Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
• Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
• Versatile protection against many oil and non-oil based particulate contaminants
• Bayonet compatibility allows use with many 3M™ half and full facepiece designs

NIOSH approved for environments containing certain oil and non-oil based particles.

Approved 3M system component

Designed to attach 3M Particulate Filters 2000/2200 Series and 7093/7093C to 3M gas/vapor respirators and cartridges

Component works with 3M Respirator 5000 Series and 3M Cartridges 6000 Series (sold separately)

Highlights

• Approved 3M system component
• Designed to attach 3M™ Particulate Filters 2000/2200 Series and 7093/7093C to 3M gas/vapor respirators and cartridges
• Component works with 3M Respirator 5000 Series and 3M Cartridges 6000 Series (sold separately)
• Particle filter adapters increases scope of potential applications
• Color: translucent white

Used to attach 3M Particulate Filters 2000/2200 Series and 7093/7093C to 3M gas/vapor respirators and cartridges.

The 3M Filter Adapter 502, Respiratory Protection System Component attaches 3M Particulate Filters 2000/2200 Series and 7093/7093C to the 3M Respirators 5000 Series and 3M Cartridges 6000 Series (all respirators, filters, cartridges, and adapters sold separately).

Ammonia and methylamine cartridge

Swept-back design for enhanced field of view and balance

Use with 3M Reusable Respirators

Highlights

• Ammonia and methylamine cartridge
• Swept-back design for enhanced field of view and balance
• Use with 3M Reusable Respirators

NIOSH approved against ammonia and methylamine. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Use in a variety of applications including agriculture, chemical manufacturing, laboratories and the food industry. When properly fitted, helps provide respiratory protection from ammonia and methylamine at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH).

NIOSH approved for environments containing certain oil and non-oil based particles

Versatile protection against certain oil and non-oil based particulate contaminants

Nuisance odor relief for acid gas levels below the Permissible Exposure Level (PEL)

NIOSH-approved for respiratory protection against certain particulates
Replaceable for cost savings

These particulate filters are designed to be easily replaced for a cost effective solution. Use 3M Particulate Filters 5000 Series with 3M Gas/Vapor Cartridges and the 3M Filter Retainer 501 to help filter certain particulates including dusts, mists, fibers, and metal fumes in addition to a broad range of gases and vapors. Or, use these filters with 3M Filter Adapter 603 and the 3M Filter Retainer 501 to help reduce particulate exposures only. These filters are easy to install, requiring minimal training. Plus, the 3M Particulate Filters 5000 Series are compatible with 3M Half Facepieces 6000, 6500/6500QL, 7500 Series, Full Facepieces 6000, FF-400, 7800 Series, 3M Scott AV-3000 HT and AV-3000 SureSeal Facepieces with AV-632 Bayonet Adapter, thus helping to reduce inventory needs.

Help protect your workforce 

After you've determined the contaminants and exposure levels in your work environment, help protect your employees with a properly fitted 3M Reusable Respirator and corresponding N95 or P95 particulate filter.
3M Particulate Filters 5000 Series are NIOSH-approved as either N95 or P95 particulate filters and help provide respiratory protection in environments containing certain oil (P95) and non-oil (N95) based particulates when used with 3M Half and Full facepieces and additional accessories. These filters help provide respiratory protection from particulate contaminant concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces and 50 times the OSHA Permissible Exposure Limit (PEL) with quantitatively fit tested full facepieces. Not for use in environments that are immediately dangerous to life or health (IDLH) or require the use of a filter approved to 100 level filter efficiency (N100 to P100).

Advance silicone material for increased comfort and greater durability

Proprietary 3M CoolFlow valve helps makes breathing easier

Dual-mode head harness adjusts easily for either standard or drop-down mode

Highlights

Advance silicone material for increased comfort and greater durability
Proprietary 3M CoolFlow valve helps makes breathing easier
Dual-mode head harness adjusts easily for either standard or drop-down mode
Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging
Color coded to indicate size (small, medium or large) for easy identification

The 3M 7500 Series Reusable Half Face Mask Respirator uses advanced silicone material to help provide comfortable and durable respiratory protection. The 3M Cool Flow Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort.

The 3M Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M Cool Flow Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

Approved 3M replacement part

Designed for 3M Half Face Reusable Respirators 3100 and 3200 (sold separately)

Replacement part can extend respiratory equipment service life

Highlights

• Approved 3M replacement part
• Designed for 3M Half Face Reusable Respirators 3100 and 3200 (sold separately)
• Replacement part can extend respiratory equipment service life
• Replaceable part can potentially result in respiratory equipment cost savings

3M Headband Assembly 381 is a replacement part that’s quick and easy to fit. Our headband assembly is specially designed for your 3M Half Face Reusable Respirator 3100 and 3200.

Pre-filter retainer for 7711 pre-filter

Used with 3M 501 Retainer for 3M Filter Series is used to keep the 3M 5N11 or the 3M 5P71 filters clasped firmly against the 6000 series

Accessories and Replacement parts

Highlights

• Pre-filter retainer for 7711 pre-filter
• Used with 3M 501 Retainer for 3M Filter Series is used to keep the 3M 5N11 or the 3M 5P71 filters clasped firmly against the 6000 series
• Accessories and Replacement parts
• 10 Pieces per case

The 3M 774 prefilter retainer is suitable for use with 3M 7700 series series Single-Cartridge Facepiece Reusable Respirator

Advanced silicone material for increased comfort and greater durability

Proprietary 3M CoolFlow Valve helps make breathing easier and can offer cooler and drier comfort

Dual-mode head harness that adjusts easily so users can wear the respirator in either standard or drop-down mode

Highlights

• Advanced silicone material for increased comfort and greater durability
• Proprietary 3M CoolFlow Valve helps make breathing easier and can offer cooler and drier comfort
• Dual-mode head harness that adjusts easily so users can wear the respirator in either standard or drop-down mode
• Solid exhalation valve cover which directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning
• Compatible with 3M TR-600 and TR-800 powered air purifying respirator and Dual Airline supplied air systems against a variety of gases, vapors, and particulate hazards

Easy breathing, comfortable and durable respiratory protection. Comes with reclosable storage bag When properly fitted and used with approved 3M Cartridges and Filters, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH).

The 3M Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M Cool Flow Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

Approved 3M replacement part.

Designed for 3M Full Face Reusable Respirators 6700, 6800 and 6900 (sold separately).

Replacement part can extend respiratory equipment service life.

Highlights

• Approved 3M replacement part
• Designed for 3M Full Face Reusable Respirators 6700, 6800 and 6900 (sold separately)
• Replacement part can extend respiratory equipment service life
• Replaceable part can potentially result in respiratory equipment cost savings

Used as a replacement part for 3M Full Face Reusable Respirators 6700, 6800 and 6900.

Large lens provides a wide field of view for excellent visibility

Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning

Available in air-purifying and supplied air respirator modes

Highlights

• Large lens provides a wide field of view for excellent visibility
• Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning
• Available in air-purifying and supplied air respirator modes
• Center adapter directs exhaled breath downward
• 3M Cool Flow Valve makes breathing easier to provide cool, dry comfort

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates and/or a variety of gases and vapors.

The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60922, 60923, 60924, 60925, 60926, 60928, and 60929.Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

Large lens provides a wide field of view for excellent visibility

Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning

Available in air-purifying and supplied air respirator modes

Highlights

• Large lens provides a wide field of view for excellent visibility
• Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning
• Available in air-purifying and supplied air respirator modes
• Center adapter directs exhaled breath downward
• 3M Cool Flow Valve makes breathing easier to provide cool, dry comfort

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates and/or a variety of gases and vapors.

The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60922, 60923, 60924, 60925, 60926, 60928, and 60929.Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.

Large lens provides a wide field of view for excellent visibility

Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning

Available in air-purifying and supplied air respirator modes

Highlights

• Large lens provides a wide field of view for excellent visibility
• Lightweight well-balanced design and silicone faceseal for enhanced comfort, durability and ease of cleaning
• Available in air-purifying and supplied air respirator modes
• Center adapter directs exhaled breath downward
• 3M Cool Flow Valve makes breathing easier to provide cool, dry comfort

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates and/or a variety of gases and vapors.

The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. The 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2003 standard, high impact level for face and eye protection.The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60922, 60923, 60924, 60925, 60926, 60928, and 60929.Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.